We are now closed for stocktake. Orders placed during this time will start shipping from the 3rd April. Thank you for you understanding.
*Suitable for use with vacuums and shop vacs*
A dust cyclone can help you:
Save time cleaning filters
If using recyclable powders you'll be able to capture these before they are lost
Zero ongoing maintenance costs
Helps protect the vacuum or extractor unit from particularly abrasive dusts and larger particles that might cause damage.
The paper filter of a vacuum cleaner clogs quickly, reducing suction power at the inlet, which requires frequent cleaning/replacement of the filter. Replacing paper filters is costly and time consuming.
The DUST COMMANDER DLX ESD MKII, a cyclone-type filter made of injected plastic, is a complement to your workshop vacuum cleaner that will enable you to eliminate the defects of conventional filters. It allows the separation of wet and dry dust particles, thereby limiting the clogging of your vacuum cleaner filters and increasing their service life.
The cyclone separator collects the extracted particles in a sealed chamber that you attach to the base of the cyclone separator.
The cyclone separator filters 98% of the air its sucks up containing dust and fine particles, only depositing 1% of these on your vacuum cleaner filter, which considerably increases its operating life, power and efficiency.
This filter is only suitable for household or workshop vacuum cleaners (e.g. Karcher, Aquavac, Festool, Mafell, Fein, etc.) This filter is NOT compatible with chip collectors (HVLP) equipped with 100 mm inlets/outlets.
We provide options with a plastic bucket which has an easy to cut lid. The 10l size will fit under most high tables or workbenches, saving space in your workshop. The total height will depend in part on the flexibility of your vacuum hose.
1 x DUST COMMANDER FILTER1 x ASSEMBLY KIT2 x 32mm ADAPTERS in ESD polypropylene2 x 35mm ADAPTERS in ESD polypropylene2 x 40mm ADAPTERS in ESD polypropylene
4 x DIN 7981 4,2 x 25 stainless steel A2 pan head tapping screw type C, cross recessed H (Phillips)4 x DIN 9021 M5 (5.3) stainless steel A2 washers1 x rubber gasket1 x self adhesive cutting template
Download Data Sheet
Guaranteed safe checkout