We are back from vacation and working through orders! There might be short delays in dispatching air scribes whilst we catch up


A dust cyclone can help you:

  • Save on expensive vacuum bags and filters

  • Save time cleaning filters
  • If using recyclable powders you'll be able to capture these before they are lost

  • Zero ongoing maintenance costs

  • Helps protect the extractor unit from particularly abrasive dusts and larger particles that might cause damage. 

The paper filter of a vacuum cleaner clogs quickly, reducing suction power at the inlet, which requires frequent cleaning/replacement of the filter. Replacing paper filters is costly and time consuming.

The DUST COMMANDER DLX ESD MKII, a cyclone-type filter made of injected plastic, is a complement to your workshop vacuum cleaner that will enable you to eliminate the defects of conventional filters. It allows the separation of dust particles, thereby limiting the clogging of your vacuum cleaner filters and increasing their service life.

The cyclone separator collects the extracted particles in a sealed chamber that you attach to the base of the cyclone separator.

The cyclone separator filters 98% of the air its sucks up containing dust and fine particles, only depositing 1% of these on your vacuum cleaner filter, which considerably increases its operating life, power and efficiency.

This kit is suitable for use with vacuums, shop vacs and LVHP dust extraction systems. It is not suitable for HVLP chip collectors and 100mm or larger systems. 


Special features of the DLX model:

  • anti-static construction
  • streamlined air inlet
  • parabolic cone
  • transversal particle/chip ejection port
Dimensions :
  • External diameter of the inlet/outlet ducts: 55 mm.
  • Inner diameter of the inlet/outlet ducts: 50 mm
  • Total height: 315 mm.
  • Cyclone diameter: 150 x 60 mm.
  • Construction: black electroconductive PA30GF (glass filled polyamide)
Package contents :

2 x 32mm ADAPTERS in ESD polypropylene
2 x 35mm ADAPTERS in ESD polypropylene
2 x 40mm ADAPTERS in ESD polypropylene

The DUST COMMANDER DLX MKII Mounting Kit includes :

4 x DIN 7981 4,2 x 25 stainless steel A2 pan head tapping screw type C, cross recessed H (Phillips)
4 x DIN 9021 M5 (5.3) stainless steel A2 washers
1 x rubber gasket
1 x self adhesive cutting template


  • Guaranteed safe checkout