{"title":"Consolidants \u0026 Adhesives","description":"","products":[{"product_id":"paraloid-b-72","title":"Paraloid B-72","description":"\u003cp\u003e\u003cspan size=\"3\" face=\"tahoma,arial,helvetica,sans-serif\"\u003eParaloid B-72 is an acrylic resin (ethyl-methacrylate copolymer) used as a consolidant, soft varnish or strong adhesive when mixed with a solvent (e.g. acetone, toluene or ethanol). It comes in solid pellets which are then dissolved in a solution (which can take many hours and often overnight).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan size=\"3\" face=\"tahoma,arial,helvetica,sans-serif\"\u003eParaloid B-72 is a conservation-grade material that is widely used due to its transparent, flexible and reversible properties. It is non-yellowing over time. It essentially 'plasticises' a rock or fossil as it penetrates.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan size=\"3\" face=\"tahoma,arial,helvetica,sans-serif\"\u003eSolutions can be mixed to the desired consistency. A 50-80% wt\/vol solution or a higher concentration creates a strong glue, which fills pores and gaps. 3-10% solutions are used as consolidants of friable, crumbly or soft and fragile matrix. An 8-10% solution can also be used as a reversible varnish for fossils, providing a soft gloss finish.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan size=\"3\" face=\"tahoma,arial,helvetica,sans-serif\"\u003e100g will make approximately 1 litre of 10% wt\/vol solution or approximately 2 litres of 5% wt\/vl solution. A little goes a long way!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"\/pages\/paraloid-b72-in-fossil-preparation\"\u003e\u003cspan size=\"3\" face=\"tahoma,arial,helvetica,sans-serif\"\u003eLearn more about mixing and using Paraloid B72 in our comprehensive guide.\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"50g","offer_id":39620335337535,"sku":"","price":6.95,"currency_code":"GBP","in_stock":true},{"title":"100g","offer_id":33367212621887,"sku":"ZPTP7201-10","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"250g","offer_id":33367212654655,"sku":"ZPTP7201-25","price":14.95,"currency_code":"GBP","in_stock":true},{"title":"500g","offer_id":33367212687423,"sku":"ZPTP7201-50","price":29.95,"currency_code":"GBP","in_stock":true},{"title":"1kg","offer_id":33367212720191,"sku":"ZPTP7201-1K","price":47.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/paraloid_b72_1kg_1__02103.1591443859.1280.1280.jpg?v=1613832896"},{"product_id":"superfine-white-epoxy-putty","title":"Milliput Superfine White Epoxy Putty","description":"\u003cp\u003eMilliput\u003cspan\u003e® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as it doesn't shrink, crack or change shape over time. When it is set, it can then be sandpapered, painted and varnish. \u003c\/span\u003e\u003cspan\u003eIt can be used as a gap or crack filler, or sculpted into whatever shape is required. Colour can be achieved by blending different types of Milliput together, or by painting with quality acrylics. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eModelling using clay modelling tools whilst the putty is still clay-like is recommended, and adding a drop of water to the surface and rubbing it in will remove fingerprints and smooth the surface. If the surface has already set and needs further adjusting, this can be done with a gentle air pen (e.g. the ZOIC MR Microraptor or VR Velociraptor). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMilliput is used by blending equal amounts of each stick (two in a pack), by rolling and kneading until the colour is uniform and free from streaks. It can then be manipulated like modelling clay. Milliput goes rock hard in two to three hours at normal room temperature (faster with heat, and can be kept as putty for 72 hours in the freezer).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can blend different Milliput colours together to aid with colour matching, but it is not recommended to mix with matrix as it will change the properties of the resin. \u003c\/span\u003ePowder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used. When performing fossil restoration, the texture achieved is vital and colour is better matched afterwards with acrylic paints. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLike epoxy glue, there are two sticks in a pack - one resin and one hardener. Kept separately, these two parts will last a long time unused. Whilst Milliput is permanent and highly adhesive, it is possible to remove. We recommend putting film of Paraloid B-72 on the surfaces that will adhere to the Milliput, which can then be loosened again with acetone. \u003c\/span\u003e\u003c\/p\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":33367213899839,"sku":"MILPSWEP","price":3.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/milliput_epoxy_putty_superfine_white_2510_p__20014.1447844378.1280.1280__39516.1610616204.1280.1280.jpg?v=1613832894"},{"product_id":"yellow-grey-epoxy-putty","title":"Milliput Yellow-Grey Epoxy Putty","description":"\u003cp\u003eMilliput\u003cspan\u003e® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as it doesn't shrink, bubble crack or change shape over time. When it is set, it can then be sandpapered, painted and varnish. \u003c\/span\u003e\u003cspan\u003eIt can be used as a gap or crack filler, or sculpted into whatever shape is required. Colour can be achieved by blending different types of Milliput together, or by painting with quality acrylics. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eModelling using clay modelling tools whilst the putty is still clay-like is recommended, and adding a drop of water to the surface and rubbing it in will remove fingerprints and smooth the surface. If the surface has already set and needs further adjusting, this can be done with a gentle air pen (e.g. the ZOIC MR Microraptor or VR Velociraptor). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMilliput is used by blending equal amounts of each stick (two in a pack), by rolling and kneading until the colour is uniform and free from streaks. It can then be manipulated like modelling clay. Milliput goes rock hard in two to three hours at normal room temperature (faster with heat, and can be kept as putty for 72 hours in the freezer).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can blend different Milliput colours together to aid with colour matching, but it is not recommended to mix with matrix as it will change the properties of the resin. \u003c\/span\u003ePowder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used. When performing fossil restoration, the texture achieved is vital and colour is better matched afterwards with acrylic paints. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLike epoxy glue, there are two sticks in a pack - one resin and one hardener. Kept separately, these two parts will last a long time unused. Whilst Milliput is permanent and highly adhesive, it is possible to remove. We recommend putting film of Paraloid B-72 on the surfaces that will adhere to the Milliput, which can then be loosened again with acetone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCan also be used for mould making and can be cast.\u003c\/p\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":33367213932607,"sku":"MILPYGEP","price":2.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/QMKMSYG__46350.1610616191.1280.1280_5b895ac6-1319-40ce-84e0-65223c7c8c81.jpg?v=1613832890"},{"product_id":"black-epoxy-putty","title":"Milliput Black Epoxy Putty","description":"\u003cp\u003eMilliput\u003cspan\u003e® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as it doesn't shrink, bubble crack or change shape over time. When it is set, it can then be sandpapered, painted and varnish. \u003c\/span\u003e\u003cspan\u003eIt can be used as a gap or crack filler, or sculpted into whatever shape is required. Colour can be achieved by blending different types of Milliput together, or by painting with quality acrylics. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eModelling using clay modelling tools whilst the putty is still clay-like is recommended, and adding a drop of water to the surface and rubbing it in will remove fingerprints and smooth the surface. If the surface has already set and needs further adjusting, this can be done with a gentle air pen (e.g. the ZOIC MR Microraptor or VR Velociraptor). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMilliput is used by blending equal amounts of each stick (two in a pack), by rolling and kneading until the colour is uniform and free from streaks. It can then be manipulated like modelling clay. Milliput goes rock hard in two to three hours at normal room temperature (faster with heat, and can be kept as putty for 72 hours in the freezer). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLike epoxy glue, there are two sticks in a pack - one resin and one hardener. Kept separately, these two parts will last a long time unused. Whilst Milliput is permanent and highly adhesive, it is possible to remove. We recommend putting film of Paraloid B-72 on the surfaces that will adhere to the Milliput, which can then be loosened again with acetone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can blend different Milliput colours together to aid with colour matching, but it is not recommended to mix with matrix as it will change the properties of the resin. \u003c\/span\u003ePowder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used. When performing fossil restoration, the texture achieved is vital and colour is better matched afterwards with acrylic paints. \u003c\/p\u003e\n\u003cp\u003eCan also be used for mould making and can be cast.\u003c\/p\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":33367213965375,"sku":"MILPBKEP","price":3.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/MEP05_1_1__32663.1610616187.1280.1280.jpg?v=1613832898"},{"product_id":"low-viscosity-superglue","title":"Low Viscosity Superglue","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eDISCOUNTS: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eADD ANY THREE\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e20g\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eSUPERGLUES TO CART TO GET 10% OFF (including low, mid, high and gel viscosity)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eOR ADD ANY THREE\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e50g\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eSUPERGLUES TO CART TO GET 10% OFF (including low, mid and high viscosity)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow viscosity superglue for consolidation and stabilising cracks in rocks, fossils and minerals.\u003c\/strong\u003e This is a very low viscosity cyanoacrylate (very close to the viscosity of water). Sets in seconds.\u003c\/p\u003e\n\u003cp\u003eAlso available in 500g size bottle for consolidation of large amounts of material.\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"20g","offer_id":39587125755967,"sku":"ZPTGCALV","price":4.95,"currency_code":"GBP","in_stock":true},{"title":"50g","offer_id":39587125788735,"sku":"ZPTGCALV-2","price":8.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/272836926_660223551690179_7195862991836812416_n.png?v=1643894787"},{"product_id":"medium-viscosity-superglue","title":"Medium Viscosity Superglue","description":"\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eDISCOUNTS: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eADD ANY THREE\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e20g\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eSUPERGLUES TO CART TO GET 10% OFF (including low, mid, high and gel viscosity)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eOR ADD ANY THREE\u003cspan\u003e \u003c\/span\u003e\u003cspan style=\"text-decoration: underline;\"\u003e50g\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003eSUPERGLUES TO CART TO GET 10% OFF (including low, mid and high viscosity)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA structural adhesive for industrial-strength general purpose bonding.\u003c\/strong\u003e This high-performance medium viscosity cyanoacrylate is a great all-rounder for joining surfaces together. This is one of the most \u003cb\u003euseful\u003c\/b\u003e and versatile superglues to have on hand. 120 cP viscosity which is approximately the same as a thin motor oil.\u003c\/p\u003e\n\u003cp\u003eAll surfaces to be bonded must be clean, dry, oil and grease free. Apply a thin film to one surface only and bring together immediately. Clamp or hold tight for a few seconds. Once aligned, the components cannot be reset without debonder. Initial set in seconds. Full cure after 24 hours.\u003c\/p\u003e\n\u003cp\u003e20g or 50g bottle.\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"20g","offer_id":39587162030143,"sku":"ZPTGCAMV","price":4.95,"currency_code":"GBP","in_stock":true},{"title":"50g","offer_id":39587162062911,"sku":"ZPTGCAMV-2","price":8.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/272656734_755578862069364_140334619473889395_n.png?v=1643895301"},{"product_id":"high-viscosity-superglue-20g","title":"High Viscosity Superglue","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eDISCOUNTS: \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eADD ANY THREE \u003cspan style=\"text-decoration: underline;\"\u003e20g\u003c\/span\u003e SUPERGLUES TO CART TO GET 10% OFF (including low, mid, high and gel viscosity)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"color: #ff2a00;\"\u003eOR ADD ANY THREE \u003cspan style=\"text-decoration: underline;\"\u003e50g\u003c\/span\u003e SUPERGLUES TO CART TO GET 10% OFF (including low, mid and high viscosity)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eA structural adhesive for industrial-strength bonding where run-off needs to be controlled.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAll surfaces to be bonded must be clean, dry, oil and grease free. Apply to one surface only and bring together immediately. Clamp or hold tight for a few seconds. Once aligned, the components cannot be reset without debonder. Initial set in seconds. Full cure after 24 hours.\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"20g","offer_id":39587154559039,"sku":"ZPTGCAHV","price":4.95,"currency_code":"GBP","in_stock":true},{"title":"50g","offer_id":39587154591807,"sku":"ZPTGCAHV-2","price":8.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/272886024_1838383473038712_4282555999042086223_n.png?v=1643895202"},{"product_id":"extra-thick-gel-superglue-20g","title":"Extra-Thick Gel Superglue 20g","description":"\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eDISCOUNTS: \u003c\/strong\u003e\u003c\/span\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eADD ANY THREE 20g SUPERGLUES TO CART TO GET 10% OFF (including low, mid, high and gel viscosity)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eA non-dripping structural adhesive for industrial-strength bonding.\u003c\/strong\u003e This extremely high viscosity cyanoacrylate adhesive gel is highly suited to \u003cb\u003egluing vertical surfaces \u003c\/b\u003e\u003cb\u003ewithout dripping\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp\u003eAll surfaces to be bonded must be clean, dry, oil and grease free. When aligning pieces you have approximately 1 minute working time. The bond can usually be separated by hand after 2-3 minutes if required. Allow to set for a minimum of 10-15 minutes. Use our Quick-Set activator spray to instantly set the outer edges of the bond in place so that you don't have to hold it or clamp it!\u003c\/p\u003e\n\u003cp\u003e20g tube with 2 precision applicators.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367219044415,"sku":"ZPTGCAEX","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/gel_bottle_upright__12906.1588593297.1280.1280.jpg?v=1613832807"},{"product_id":"low-viscosity-superglue-500g","title":"Low Viscosity Superglue 500g","description":"\u003cp\u003e\u003cstrong\u003eLow viscosity superglue for consolidation and stabilising cracks in rocks, fossils and minerals.\u003c\/strong\u003e This is a very low viscosity cyanoacrylate (very close to the viscosity of water). Sets in seconds.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePerfectly suited for permanent\u003cstrong\u003e consolidation and stabilisation\u003c\/strong\u003e of rocks, fossils and minerals, plasticising the any pore it gets into. It utilizes \u003cstrong\u003ewicking or capillary action\u003c\/strong\u003e for deep penetration into small cracks and any porous rock – i.e. it pulls itself into small spaces.\u003c\/li\u003e\n\u003cli\u003eIdeal for use when joining \u003cstrong\u003eextremely closely fitting parts and smooth, even surfaces\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eGreat for consolidating hairline fractures or holding thin, flaky material in place during the process of fossil preparation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003eAlso available in 20g \u0026amp; 50g size.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367219077183,"sku":"ZPTGCAL5","price":33.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/xl_low_visc__20003.1588339898.1280.1280.jpg?v=1613832855"},{"product_id":"superglue-debonder-liquid-50g","title":"Superglue Debonder (Liquid) 20ml","description":"\u003cp\u003e\u003cstrong\u003eBrilliant for removing the superglue that somehow gets on your skin no matter how careful you have been! If you have a habit of attaching yourself to what you're gluing, this is an essential for your workshop. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eShake well before using. Apply direct from bottle. If used to remove glue from skin, allow debonder to penetrate the bond line for 60-120 seconds and rub in with fingertips. On rocks and fossils, removal may take longer after application or repeat applications may be required for thick glue or a deep bond line. Allow glue to soften which can then be scraped away. Clean the surface of the rock or fossil with isopropyl alcohol and a lint free cloth. May stain light surfaces.\u003c\/p\u003e\n\u003cp\u003e20ml bottle.\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":39661641564223,"sku":"ZPTCADBL","price":3.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/files\/PhotoRoom-20230621_122946.jpg?v=1687347817"},{"product_id":"quick-set-superglue-activator-spray","title":"Quick-Set Superglue Activator Spray","description":"\u003cp\u003e\u003cstrong\u003e**UK MAINLAND SHIPPING ONLY**\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eActivator spray to instantly set superglue in place. Put the clamps away and let our non-yellowing formula do the job! Can be used with the entire range of ZOIC PalaeoTech cyanoacrylates.\u003c\/p\u003e\n\u003cp\u003e200ml aerosol bottle. \u003c\/p\u003e\n\u003cp\u003eFind out more below!\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"UK Mainland Shipping ONLY","offer_id":33367219175487,"sku":"ZPTCAATV-01","price":13.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/activator__10833.1588339479.1280.1280.jpg?v=1613832947"},{"product_id":"superglue-3-x-20g-low-medium-and-high-viscosity","title":"3 x 20g Low, Medium and High Viscosity Superglue","description":"\u003cp\u003e3-Pack of our three grades of liquid cyanoacrylate. 3x 20g bottles of low, medium and high viscosity. Perfectly suited to a variety of tasks in fossil, mineral and rock conservation and preparation.\u003c\/p\u003e\n\u003cp\u003eAll surfaces to be bonded must be clean, dry, oil and grease free. Apply to one surface only and bring together immediately. Once aligned and set, the components cannot be reset without debonder. Activator can be purchased separately to instantly set glue. Full cure after 24 hours.\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367219241023,"sku":"ZPTGCAK3","price":13.36,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/3_cyanoacrylate_set_bundle_kit_superglue_high_medium_low_viscosity__88973.1588341782.1280.1280.jpg?v=1613832669"},{"product_id":"primal-rhoplex-ws-24-250ml","title":"Primal® (Rhoplex) WS 24 250ml","description":"\u003cp\u003e\u003cspan size=\"4\"\u003ePrimal\u003cspan\u003e®\u003c\/span\u003e (Rhoplex) WS 24 is a \u003cspan\u003e\u003c\/span\u003e\u003cb\u003econservation grade alternative to PVA \u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003ewhich is less susceptible to cracking, yellowing and becoming brittle over time. Primal (Rhoplex) WS 24 is used particularly for preservation of mammoth tusks\/teeth and ice age vertebrate remains that require consolidation. It is also used as a consolidant in the excavation and recovery of fossils in damp, wet or waterlogged environments. \u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003eIt is a consolidant with a very small particle size (0.03 Microns) which can penetrate deeply into fine grained materials. Used for consolidation of \u003cspan\u003e\u003c\/span\u003e\u003cb\u003ebones \u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003e(fossil and modern - a particular favourite with archaeological finds and Ice Age bones),\u003cspan\u003e\u003c\/span\u003e\u003cb\u003eplaster, wall paintings and rocks\/fossils\/archaeological material in damp, wet or waterlogged environments. \u003cspan\u003e\u003c\/span\u003e\u003c\/b\u003eSuitable for consolidation of masonry. \u003cbr\u003e\n\u003cdiv\u003e\n\u003cbr\u003eCan be used as an alternative to Paraloid B-72 (see our other listings) in \u003cspan\u003e\u003c\/span\u003e\u003cb\u003ewet conditions \u003c\/b\u003e\u003cspan\u003e\u003c\/span\u003eon most materials (not recommended for metals).\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eAn acrylic colloidal dispersion in water with a solids content of 36%. pH 7. Keep from freezing (this item will not be shipped in freezing conditions).\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cb\u003eDilute with water to achieve desired concentration. \u003c\/b\u003eDilutions of 10-20 parts water to the 36% solution are usually suitable for most applications. Test on a small area first. If the solution is not dilute enough, it will appear milky on the surface.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003eWhen wet it can be removed with water. When dry, remove with pure acetone.\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv\u003e250ml bottle with safety cap.\u003c\/div\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367220617279,"sku":"","price":8.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/P6120003__34645.1592032057.1280.1280.jpg?v=1613832952"},{"product_id":"precision-applicator-bottle-for-low-viscosity-fluids","title":"Precision Applicator Bottle 60ml for Low Viscosity Fluids (3x Dispensing Tips)","description":"\u003cp\u003ePrecision applicator dispenser bottle for adhesives with 3 dispensing tips of different diameters. We use ours with a variety of different concentrations of Paraloid B-72 for very controlled dispensing. This pack is best suited to the dispensing of low viscosity fluids.\u003c\/p\u003e\u003cp\u003eTwist lock mechanism to attach and detach different dispensing heads quickly. When you need to seal the bottle, simply use the included cap. Different tips can be easily cleaned with the included syringe (with the same twist lock mechanism) and a suitable solvent for cleaning (pure acetone works for Paraloid!).\u003c\/p\u003e\u003cp\u003e\u003cu\u003ePack contains:\u003c\/u\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x 60ml Applicator Bottle\u003c\/li\u003e\n\u003cli\u003e1 x Purple Tip (0.51mm aperture) ZPT002\u003c\/li\u003e\n\u003cli\u003e1 x Orange Tip (0.33mm aperture) ZPT003\u003c\/li\u003e\n\u003cli\u003e1 x Pink Tip (0.15mm aperture) ZPT004\u003c\/li\u003e\n\u003cli\u003e1 x Cap\u003c\/li\u003e\n\u003cli\u003e1 x Cleaning Syringe\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBottle is interchangeable with ZPT00 series of tips, including brush heads ZPT007 (7mm flat) and ZPT008 (2mm round).\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367223337023,"sku":"ZPT_PAL_V","price":8.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Adhesive_Precision_Applicator_Bottles_35__92084.1592657712.1280.1280.jpg?v=1613832952"},{"product_id":"precision-applicator-bottle-60ml-for-high-viscosity-fluids-1x-dispensing-tip","title":"Precision Applicator Bottle 60ml for High Viscosity Fluids (1x Dispensing Tip)","description":"\u003cp\u003ePrecision applicator dispenser bottle for adhesives with 1 easy flow dispensing tip for high viscosity fluids. This is what we use for our Paraloid B-72 adhesive which is very viscous, and this bottle provides very controlled dispensing. \u003c\/p\u003e\u003cp\u003eTwist lock mechanism to attach and detach the dispensing tip quickly. When you need to seal the bottle, simply use the included cap. Different tips can be easily cleaned with the included syringe (with the same twist lock mechanism) and a suitable solvent for cleaning (pure acetone works for Paraloid!).\u003c\/p\u003e\u003cp\u003e\u003cu\u003ePack contains:\u003c\/u\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x 60ml Applicator Bottle\u003c\/li\u003e\n\u003cli\u003e1 x Green Tip (1.6mm aperture) ZPT001\u003c\/li\u003e\n\u003cli\u003e1 x Cap\u003c\/li\u003e\n\u003cli\u003e1 x Cleaning Syringe\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367223468095,"sku":"ZPT_PA_HV","price":5.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Adhesive_Precision_Applicator_Bottles_40__06388.1592658705.1280.1280.jpg?v=1613832941"},{"product_id":"3x-precision-applicator-bottles-60ml-for-4x-dispensing-tips","title":"3x Precision Applicator Bottles 60ml (4x Dispensing Tips)","description":"\u003cp\u003ePrecision applicator dispenser bottle for adhesives with 4 dispensing tips of different diameter apertures. We use ours with a variety of different concentrations of Paraloid B-72 for very controlled dispensing.\u003c\/p\u003e\u003cp\u003eTwist lock mechanism to attach and detach different dispensing heads quickly. When you need to seal the bottle, simply use the included cap. Different tips can be easily cleaned with the included syringe (with the same twist lock mechanism) and a suitable solvent for cleaning (pure acetone works for Paraloid!).\u003c\/p\u003e\u003cp\u003e\u003cu\u003ePack contains:\u003c\/u\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 x 60ml Applicator Bottles\u003c\/li\u003e\n\u003cli\u003e1 x Green Tip (1.6mm aperture) ZPT001\u003c\/li\u003e\n\u003cli\u003e1 x Purple Tip (0.51mm aperture) ZPT002\u003c\/li\u003e\n\u003cli\u003e1 x Orange Tip (0.33mm aperture) ZPT003\u003c\/li\u003e\n\u003cli\u003e1 x Pink Tip (0.15mm aperture) ZPT004\u003c\/li\u003e\n\u003cli\u003e3 x Caps\u003c\/li\u003e\n\u003cli\u003e1 x Cleaning Syringe\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBottle is interchangeable with ZPT00 series of tips, including brush heads ZPT007 (7mm flat) and ZPT008 (2mm round).\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367223500863,"sku":"ZPT_PAL_PACK","price":16.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Adhesive_Precision_Applicator_Bottles_25__05794.1592659060.1280.1280.jpg?v=1613832671"},{"product_id":"3x-precision-applicator-bottles-60ml-4x-dispensing-tips-2x-brush-tips","title":"3x Precision Applicator Bottles 60ml (4x Dispensing Tips + 2x Brush Tips)","description":"\u003cp\u003ePrecision applicator dispenser bottle for adhesives with 4 dispensing tips of different diameter apertures. We use ours with a variety of different concentrations of Paraloid B-72 for very controlled dispensing.\u003c\/p\u003e\u003cp\u003eTwist lock mechanism to attach and detach different dispensing heads quickly. When you need to seal the bottle, simply use the included cap. Different tips can be easily cleaned with the included syringe (with the same twist lock mechanism) and a suitable solvent for cleaning (pure acetone works for Paraloid!).\u003c\/p\u003e\u003cp\u003eEach set of bottles or single bottle pack comes with a 5ml CLEANING SYRINGE for the tips so you can reuse them again and again.\u003c\/p\u003e\u003cp\u003e\u003cu\u003ePack contains:\u003c\/u\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 x 60ml Applicator Bottles\u003c\/li\u003e\n\u003cli\u003e1 x Green Tip (1.6mm aperture) ZPT001\u003c\/li\u003e\n\u003cli\u003e1 x Purple Tip (0.51mm aperture) ZPT002\u003c\/li\u003e\n\u003cli\u003e1 x Orange Tip (0.33mm aperture) ZPT003\u003c\/li\u003e\n\u003cli\u003e1 x Pink Tip (0.15mm aperture) ZPT004\u003c\/li\u003e\n\u003cli\u003e1 x Flat Brush 7mm (1.6mm aperture) ZPT 007\u003c\/li\u003e\n\u003cli\u003e1 x Round Brush 2mm (0.43mm aperture) ZPT 008\u003c\/li\u003e\n\u003cli\u003e3 x Caps\u003c\/li\u003e\n\u003cli\u003e1 x Cleaning Syringe\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBrush applicators are ideal when working with solvent based adhesives that rely on evaporation. When working with Paraloid B-72 in acetone as a consolidant, for instance you are likely to encounter two problems by having an open pot which you dip your brush into. Firstly, the solvent will evaporate (slowly), increasing the concentration of the solution over the time you're using it. Secondly, this form of application helps prevent reverse migration - a constant stream of solute rather than an intermittent one is more likely to penetrate deeper.\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367223533631,"sku":"ZPT_PAL_PACK-B","price":34.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Adhesive_Precision_Applicator_Bottles_16__60299.1592659546.1280.1280.jpg?v=1613832669"},{"product_id":"green-tip-1-6mm-to-fit-precision-dispensing-bottles-zpt001","title":"Green Tip 1.6mm (to fit Precision Applicator Bottles) ZPT001","description":"\u003cp\u003eGreen tip for use with high viscosity fluids. 1.6mm aperture.\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367223566399,"sku":"ZPT001","price":0.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Adhesive_Precision_Applicator_Bottles_8__04855.1592659688.1280.1280.jpg?v=1613832850"},{"product_id":"purple-tip-0-51mm-to-fit-precision-dispensing-bottles-zpt002","title":"Purple Tip 0.51mm (to fit Precision Applicator Bottles) ZPT002","description":"\u003cp\u003ePurple tip for use with medium to low viscosity fluids. 0.51mm aperture.\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367223599167,"sku":"ZPT002","price":0.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Adhesive_Precision_Applicator_Bottles_12__30309.1592660079.1280.1280.jpg?v=1613832951"},{"product_id":"orange-tip-0-33mm-to-fit-precision-applicator-bottles-zpt003","title":"Orange Tip 0.33mm (to fit Precision Applicator Bottles) ZPT003","description":"\u003cp\u003eOrange tip for use with low viscosity fluids. 0.33mm aperture.\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367223631935,"sku":"ZPT003","price":0.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Adhesive_Precision_Applicator_Bottles_11__39216.1592660333.1280.1280.jpg?v=1613832892"},{"product_id":"pink-tip-0-15mm-to-fit-precision-applicator-bottles-zpt004","title":"Pink Tip 0.15mm (to fit Precision Applicator Bottles) ZPT004","description":"\u003cp\u003ePink tip for use with very controlled application of low viscosity fluids. 0.15mm aperture.\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367223664703,"sku":"ZPT004","price":0.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Adhesive_Precision_Applicator_Bottles_10__32802.1592660779.1280.1280.jpg?v=1613832896"},{"product_id":"7mm-flat-brush-tip-1-6mm-aperture-to-fit-precision-applicator-bottles-zpt007","title":"7mm Flat Brush Tip 1.6mm aperture (to fit Precision Applicator Bottles) ZPT007","description":"\u003cp\u003eBrush tip for application of medium to low viscosity fluids. Fits on our precision application bottles. 1.6mm apeture.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBrush applicators are ideal when working with solvent based adhesives that rely on evaporation. When working with Paraloid B-72 in acetone as a consolidant, for instance you are likely to encounter two problems by having an open pot which you dip your brush into. Firstly, the solvent will evaporate (slowly), increasing the concentration of the solution over the time you're using it. Secondly, this form of application helps prevent reverse migration - a constant stream of solute rather than an intermittent one is more likely to penetrate deeper.\u003c\/span\u003e\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367223697471,"sku":"ZPT007","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Adhesive_Precision_Applicator_Bottles_57__37458.1592661142.1280.1280.jpg?v=1613832713"},{"product_id":"2mm-round-brush-tip-0-43mm-aperture-to-fit-precision-applicator-bottles-zpt008","title":"2mm Round Brush Tip 0.43mm aperture (to fit Precision Applicator Bottles) ZPT008","description":"\u003cp\u003eBrush tip for application of medium to low viscosity fluids. 0.43mm apeture.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBrush applicators are ideal when working with solvent based adhesives that rely on evaporation. When working with Paraloid B-72 in acetone as a consolidant, for instance, you are likely to encounter two problems by having an open pot which you dip your brush into. Firstly, the solvent will evaporate (slowly), increasing the concentration of the solution over the time you're using it. Secondly, this form of application helps prevent reverse migration - a constant stream of solute rather than an intermittent one is more likely to penetrate deeper.\u003c\/span\u003e\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367223730239,"sku":"ZPT008","price":9.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Adhesive_Precision_Applicator_Bottles_59__96193.1592661385.1280.1280.jpg?v=1613832669"},{"product_id":"spare-cap-for-precision-applicator-bottles-twist-lock","title":"Spare Cap for Precision Applicator Bottles (Twist-Lock)","description":"\u003cp\u003eSpare cap with twist-lock to fit precision applicator bottles. \u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367223763007,"sku":"","price":0.55,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Adhesive_Precision_Applicator_Bottles_13__76135.1592661584.1280.1280.jpg?v=1613832950"},{"product_id":"60ml-precision-applicator-bottle-cap-only","title":"60ml Precision Applicator Bottle + Cap Only","description":"\u003cp\u003ePrecision application bottle and cap. 60ml. Dispensing tips purchased separately. \u003c\/p\u003e\n\u003cp\u003eTwist lock mechanism to attach and detach different dispensing heads quickly. When you need to seal the bottle, simply use the included cap. Different tips can be easily cleaned with the included syringe (with the same twist lock mechanism) and a suitable solvent for cleaning (pure acetone works for Paraloid!).\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367223795775,"sku":"ZPT_PA_BOTTLE","price":4.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/IMG_20200620_150354_1__37044.1592662011.1280.1280.jpg?v=1613832723"},{"product_id":"5-wt-vol-paraloid-b-72-premixed-in-acetone","title":"5% wt\/vol Paraloid B-72 premixed in Acetone","description":"\u003cp\u003eTake all the hassle out of mixing up your own Paraloid™ solutions at home. 5% wt\/vol Paraloid B-72 premixed in acetone available in 500ml and 1000ml bottles. No additives, no nasties, just straight up Paraloid in Acetone ready to use out of the bottle.\u003c\/p\u003e\n\u003cp\u003eA 5% solution can be used as a consolidant. The solution can be further diluted as per user requirements.\u003c\/p\u003e\n\u003cp\u003eIn fossil preparation, we use very thin solutions of Paraloid B-72 to consolidate or impregnate rocks and fossils, essentially turning them to plastic. Repeat applications of 2-5% wt\/vol solutions in acetone are frequently used to consolidate, followed by a 5-10% wt\/vol solution to seal the surface. Consolidation works best on more porous rocks and fossils, which is pretty handy as these more porous or friable rocks are often the ones that require consolidation. Equally, this solution can be used to wick into hairline fractures.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/paraloid-b72-in-fossil-preparation\"\u003eRead our comprehensive guide to using Paraloid B-72 in fossil prep here. \u003c\/a\u003e\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"500ml \/ UK Mainland Shipping ONLY","offer_id":33367223828543,"sku":"ZPTPB72A-50-YE","price":23.95,"currency_code":"GBP","in_stock":true},{"title":"1000ml \/ UK Mainland Shipping ONLY","offer_id":33367223861311,"sku":"ZPTPB72A-10-YE","price":36.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/5_percent_solution_in_acetone_500ml_and_1000ml__79795.1592663683.1280.1280.jpg?v=1613832716"},{"product_id":"10-wt-vol-paraloid-b-72-premixed-in-acetone","title":"10% wt\/vol Paraloid B-72 premixed in Acetone","description":"\u003cp\u003eTake all the hassle out of mixing up your own Paraloid™ solutions at home. 10% wt\/vol Paraloid B-72 premixed in acetone available in 500ml and 1000ml bottles. No additives, no nasties, just straight up Paraloid in Acetone ready to use out of the bottle.\u003c\/p\u003e\n\u003cp\u003eA 10% solution can be used as a thicker consolidant or a varnish. The solution can be further diluted as per user requirements.\u003c\/p\u003e\n\u003cp\u003eIn fossil preparation, we use very thin solutions of Paraloid B-72 to consolidate or impregnate rocks and fossils, essentially turning them to plastic. Repeat applications of 2-5% wt\/vol solutions in acetone are frequently used to consolidate, followed by a 5-10% wt\/vol solution to seal the surface. A 10% solution can also act as a removable varnish.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/paraloid-b72-in-fossil-preparation\"\u003eLearn more about using Paraloid B-72 in fossil preparation by reading our comprehensive guide.\u003c\/a\u003e\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"500ml \/ UK Mainland Shipping ONLY","offer_id":33367223894079,"sku":"ZPTPB72A10-50-YE","price":22.05,"currency_code":"GBP","in_stock":true},{"title":"1000ml \/ UK Mainland Shipping ONLY","offer_id":33367223926847,"sku":"ZPTPB72A10-10-YE","price":28.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/10_percent_solution_in_acetone_500ml_1000ML__60900.1592665215.1280.1280.jpg?v=1613832667"},{"product_id":"15-wt-vol-paraloid-b-72-premixed-in-acetone-dilute-as-required","title":"15% wt\/vol Paraloid B-72 Premixed in Acetone (dilute as required)","description":"\u003cp\u003eTake all the hassle out of mixing up your own Paraloid™ solutions at home. Simply dilute this 15% solution as required. No additives, no nasties, just straight up Paraloid in Acetone ready to use out of the bottle. Conservation grade.\u003c\/p\u003e\n\u003cp\u003eA 10% solution can be used as a thicker consolidant or a varnish. The solution can be further diluted as per user requirements.\u003c\/p\u003e\n\u003cp\u003eIn fossil preparation, we use very thin solutions of Paraloid B-72 to consolidate or impregnate rocks and fossils, essentially turning them to plastic. Repeat applications of 2-5% wt\/vol solutions in acetone are frequently used to consolidate, followed by a 5-10% wt\/vol solution to seal the surface. A 10% solution can also act as a removable varnish.\u003c\/p\u003e\n\u003cp\u003eSuitable for fossils, minerals, rocks, metals, ceramics, wood and more. Not suitable for plastics and rubber.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/paraloid-b72-in-fossil-preparation\"\u003eRead our comprehensive guide to using Paraloid B-72 in fossil preparation here. \u003c\/a\u003e\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"UK Mainland Shipping ONLY \/ 500ml","offer_id":33367223992383,"sku":"ZPTPB7215-YE","price":24.25,"currency_code":"GBP","in_stock":true},{"title":"UK Mainland Shipping ONLY \/ 1000ml","offer_id":39252434944063,"sku":"","price":37.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/15_PERCENT_PARALOID_DILUTE_AS_REQUIRED__93019.1592665628.1280.1280.jpg?v=1613832669"},{"product_id":"microbubbles-50g-lightweight-glass-bubble-filler","title":"Microbubbles (Lightweight Glass Bubble Filler)","description":"\u003cp\u003eMicroballoons are tiny glass bubbles, that create an extremely lightweight filler when combined with resins and acrylic resins (such as Paraloid B-72). Micro-cellular, inert, non-toxic hollow glass particles. \u003c\/p\u003e\u003cp\u003eMixed with a 60-80% wt\/vol Paraloid in acetone solution it can create a strong, conservation grade filler. Reasonable working time (ethanol can be added to the acetone solutionto delay setting but there is an enhanced toxicity). Can be shaped, sculpted and sanded. Takes a few days to cure to full strength. \u003c\/p\u003e\u003cp\u003eVery fine particles (60 micron). \u003c\/p\u003e\u003cp\u003ePlease wear a respirator when using as particles easily become airborne due to their lightweight nature and tiny size. No specific hazards. \u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"50g","offer_id":33376575520831,"sku":"ZPTMBGB-1","price":4.0,"currency_code":"GBP","in_stock":true},{"title":"100g","offer_id":33376575553599,"sku":"ZPTMBGB-2","price":7.0,"currency_code":"GBP","in_stock":true},{"title":"250g","offer_id":33376575586367,"sku":"ZPTMBGB-3","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"1000g","offer_id":33376575619135,"sku":"ZPTMBGB-4","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Microballoons_bag__17436.1592667678.1280.1280.jpg?v=1613832901"},{"product_id":"99-8-acetone-1l","title":"99.8% Acetone (1l, 2l, 5l)","description":"\u003cp\u003e99.8% pure lab-grade acetone. Suitable for use as a solvent for Paraloid, Butvar B-76 and more.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"1l \/ UK Mainland Shipping ONLY","offer_id":33376003031103,"sku":"ZPTACET1l-YE-1","price":7.99,"currency_code":"GBP","in_stock":true},{"title":"2l (2 x 1l bottles) \/ UK Mainland Shipping ONLY","offer_id":33376003063871,"sku":"ZPTACET1l-YE-2","price":14.99,"currency_code":"GBP","in_stock":true},{"title":"5l (5x 1l bottles) \/ UK Mainland Shipping ONLY","offer_id":33376003096639,"sku":"ZPTACET1l-YE-3","price":24.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Acetone_1l__56152.1592668141.1280.1280.jpg?v=1613832715"},{"product_id":"paraloid-b-72-100g-acetone-1l-bundle","title":"Paraloid B-72 (100g) \u0026 Acetone (1l) Bundle","description":"\u003cp\u003e100g of Paraloid B-72 and 1l of Acetone ready for you to mix at home to your desired concentration.\u003c\/p\u003e\n\u003cp\u003eYou’ll probably have heard about weight-by-vol% solutions – and this is enough to give anyone who hasn’t done Chemistry since they were 15 the collywobbles. Fear not! It’s not as tricky as it sounds to get the right concentration of solution for the job. \u003cstrong\u003eA 10% wt\/vol solution is the same as 10g of Paraloid B-72 for every 100ml of solution. \u003c\/strong\u003eThis should not be confused with 10g of Paraloid added to every 100ml of \u003cem\u003esolvent \u003c\/em\u003e(this is a weight-by-weight solution).\u003c\/p\u003e\n\u003cp\u003eThis can make the brain hurt a bit, but there are two ways to approach the measurements.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1. Weight-by-weight solutions\u003c\/strong\u003e: Calculate your proportions w\/w. E.g. 10g of Paraloid in 100ml of Acetone is a 10% w\/w solution. You might need to experiment as most of the recommendations you’ll find online pertain to w\/vol% solutions (or perhaps w\/w solutions that the author believes to be a w\/vol solution – you can see it is a bit of a wormhole). There is no problem doing it this way if you find it easier – just be consistent with yourself and make sure you write on the bottle the concentration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Weight\u003c\/strong\u003e-\u003cstrong\u003eby-volume solutions: \u003c\/strong\u003eMost recommendations are expressed as weight by volume and so you’re more likely to get the results you’re after by following this method. You can make up a solution with a set amount of Paraloid and dilute it to the concentration you require once the pellets have dissolved in the solvent.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/paraloid-b72-in-fossil-preparation\"\u003eLearn more about using and mixing Paraloid B72 in our comprehensive guide\u003c\/a\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e18+\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Yes","offer_id":33367224156223,"sku":"ZPTBUND72A-YE","price":16.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/acetone_and_paraloid_comb__31926.1592669395.1280.1280.jpg?v=1613832898"},{"product_id":"cab-o-sil-amorphous-fumed-silica-20g","title":"Cab-o-Sil® Amorphous Fumed Silica 20g","description":"\u003cp\u003e\u003cspan\u003eThis is the thixotrope which improves the rheology of concentrated solutions of Paraloid B-72 (80%+). Increases adhesive viscosity, improves extrusiopn, prevents sagging whilst drying. Mix in thoroughly.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cem\u003eAlways\u003c\/em\u003e wear a respirator and gloves when handling fumed silica. Work in a well ventilated environment.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e20g bag. \u003c\/span\u003e\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":33367225335871,"sku":"ZPTCOSIL","price":6.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Cabosil__98890.1598176935.1280.1280.jpg?v=1613832754"},{"product_id":"carbowax-peg-water-soluble-wax","title":"Carbowax™ PEG Water Soluble Support Wax","description":"\u003cp\u003eCarbowax is a water-soluble wax which can be used as a temporary support, and as a consolidant in both prep-work and fieldwork. It melts at low temperatures, and dissolves in water.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIt can be used as a temporary support for fragile structures, for temporarily embedding a specimen for mechanical preparation, or for protecting structures like spines during shipping.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePEG 4000 (Polyethelene Glycol) - this grade is relatively hard. It can be chipped away during mechanical preparation and holds its shape, without being too hard and brittle. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePreparing the Carbowax\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eMelt at a low-medium heat and allow to partially cool. Either pour into a mould or drop onto the space required. Plasticine can be used to help contain the molten wax, as can homemade cardboard molds. Do not overheat. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFieldwork\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbowax can also be used as a temporary consolidant in fieldwork, allowing the temporary support and excavation of fragile specimens that can’t be removed without being embedded. Surround the rock in a material like platiscine and pouring melted carbowax into the mould. Remove plasticine when the carbowax is removed. Slowly melt the carbowax to remove.\u003c\/p\u003e\n\u003cp\u003eIt is often used in marine archaeology for preservation of timber. There are very few approaches that can be used to recover wet and fragile speicmens from moist environments. However, in this instance it wouldn’t be considered reversible as it is likely the specimen would fall apart without the carbowax binding it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFossil Preparation\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eIt can be used as a structural support for spines or other delicate features during preparation. Smaller specimens can be entirely embedded in Carbowax for strength and rigidity during mechanical preparation, which means you can prep both sides (e.g. microvertebrates). It can also be brushed on to fill holes and pores. Cracks can be temporarily filled for stability. Plasticine can be shaped to create a container for the Carbowax, which can be removed when the Carbowax has set. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProtective Packaging and Transportation\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCarbowax is also useful to protect fragile features like ammonite spines during shipping and transportation, as the recipient simply has to soak the fossil in warm water to remove. It can also be used to help safely transport fossils from the field back to the workshop. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRemoval\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhen finished, simply place the fossil with the wax in warm-hot water (approx 75°C) and the wax will dissolve. You can also chip away most of it first or remove entirely mechanically if it is safe to do so. Run through a coffee filter first if there are bits of matrix in it. To recover and reuse the wax, wait for the water to evaporate at room temperature and collect. \u003c\/span\u003e\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"100g","offer_id":33376563462207,"sku":"ZPTCARBO-1","price":5.99,"currency_code":"GBP","in_stock":true},{"title":"250g","offer_id":33376563494975,"sku":"ZPTCARBO-2","price":10.99,"currency_code":"GBP","in_stock":true},{"title":"500g","offer_id":33376563527743,"sku":"ZPTCARBO-3","price":18.99,"currency_code":"GBP","in_stock":true},{"title":"1000g","offer_id":33376563560511,"sku":"ZPTCARBO-4","price":33.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Carbowax_250g__96843.1602839306.1280.1280.jpg?v=1613832756"},{"product_id":"20-wt-vol-paraloid-b-72-premixed-in-acetone","title":"20% wt\/vol Paraloid B-72 premixed in Acetone","description":"\u003cp\u003eTake all the hassle out of mixing up your own Paraloid™ solutions at home. Simply dilute this 20% solution as required. No additives, no nasties, just straight up Paraloid in Acetone ready to use out of the bottle. Conservation grade.\u003c\/p\u003e\n\u003cp\u003eIn fossil preparation, we use very thin solutions of Paraloid B-72 to consolidate or impregnate rocks and fossils, essentially turning them to plastic. Repeat applications of 2-5% wt\/vol solutions in acetone are frequently used to consolidate, followed by a 5-10% wt\/vol solution to seal the surface. A 10% solution can also act as a removable varnish. 20-30% solutions are used in chemical preparation as a barrier layer.\u003c\/p\u003e\n\u003cp\u003eSuitable for fossils, minerals, rocks, metals, ceramics, wood and more. Not suitable for plastics and rubber.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.zoicpalaeotech.co.uk\/pages\/paraloid-b72-in-fossil-preparation\"\u003eRead our comprehensive guide to using Paraloid B-72 in fossil preparation here. \u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"UK Mainland Shipping ONLY \/ 500ml","offer_id":33367230578751,"sku":"ZPTPB72A20-YE","price":28.71,"currency_code":"GBP","in_stock":true},{"title":"UK Mainland Shipping ONLY \/ 1000ml","offer_id":39252435402815,"sku":"","price":38.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/PXL_20201222_152248678_2__20407.1609405773.1280.1280.jpg?v=1613832670"},{"product_id":"milliput-terracotta-epoxy-putty","title":"Milliput Terracotta Epoxy Putty","description":"\u003cp\u003eMilliput\u003cspan\u003e® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as it doesn't shrink, bubble crack or change shape over time. When it is set, it can then be sandpapered, painted and varnish. \u003c\/span\u003e\u003cspan\u003eIt can be used as a gap or crack filler, or sculpted into whatever shape is required. Colour can be achieved by blending different types of Milliput together, or by painting with quality acrylics. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eModelling using clay modelling tools whilst the putty is still clay-like is recommended, and adding a drop of water to the surface and rubbing it in will remove fingerprints and smooth the surface. If the surface has already set and needs further adjusting, this can be done with a gentle air pen (e.g. the ZOIC MR Microraptor or VR Velociraptor). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMilliput is used by blending equal amounts of each stick (two in a pack), by rolling and kneading until the colour is uniform and free from streaks. It can then be manipulated like modelling clay. Milliput goes rock hard in two to three hours at normal room temperature (faster with heat, and can be kept as putty for 72 hours in the freezer).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can blend different Milliput colours together to aid with colour matching, but it is not recommended to mix with matrix as it will change the properties of the resin. \u003c\/span\u003ePowder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used. When performing fossil restoration, the texture achieved is vital and colour is better matched afterwards with acrylic paints. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLike epoxy glue, there are two sticks in a pack - one resin and one hardener. Kept separately, these two parts will last a long time unused. Whilst Milliput is permanent and highly adhesive, it is possible to remove. We recommend putting film of Paraloid B-72 on the surfaces that will adhere to the Milliput, which can then be loosened again with acetone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCan also be used for mould making and can be cast.\u003c\/p\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":39252399292479,"sku":"MILLIPUTTR","price":3.1,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/milliput-epoxy-paste-terra-cotta.jpg?v=1614597080"},{"product_id":"milliput-silver-grey-epoxy-putty","title":"Milliput Silver-Grey Epoxy Putty","description":"\u003cp\u003eMilliput\u003cspan\u003e® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as it doesn't shrink, crack or change shape over time. When it is set, it can then be sandpapered, painted and varnish. \u003c\/span\u003e\u003cspan\u003eIt can be used as a gap or crack filler, or sculpted into whatever shape is required. Colour can be achieved by blending different types of Milliput together, or by painting with quality acrylics. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eModelling using clay modelling tools whilst the putty is still clay-like is recommended, and adding a drop of water to the surface and rubbing it in will remove fingerprints and smooth the surface. If the surface has already set and needs further adjusting, this can be done with a gentle air pen (e.g. the ZOIC MR Microraptor or VR Velociraptor). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMilliput is used by blending equal amounts of each stick (two in a pack), by rolling and kneading until the colour is uniform and free from streaks. It can then be manipulated like modelling clay. Milliput goes rock hard in two to three hours at normal room temperature (faster with heat, and can be kept as putty for 72 hours in the freezer).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can blend different Milliput colours together to aid with colour matching, but it is not recommended to mix with matrix as it will change the properties of the resin. \u003c\/span\u003ePowder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used. When performing fossil restoration, the texture achieved is vital and colour is better matched afterwards with acrylic paints. \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLike epoxy glue, there are two sticks in a pack - one resin and one hardener. Kept separately, these two parts will last a long time unused. Whilst Milliput is permanent and highly adhesive, it is possible to remove. We recommend putting film of Paraloid B-72 on the surfaces that will adhere to the Milliput, which can then be loosened again with acetone. \u003c\/span\u003e\u003c\/p\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":39252399456319,"sku":"MILPSVGR","price":3.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/milliputsilvergrey.jpg?v=1614597256"},{"product_id":"milliput-epoxy-putty-pack-for-grey-stone-restoration","title":"Milliput Epoxy Putty Pack for Grey Stone Restoration (3-Pack)","description":"\u003cp\u003eIn this pack:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1x Superfine White\u003c\/li\u003e\n\u003cli\u003e1x Black\u003c\/li\u003e\n\u003cli\u003e1x Silver Grey\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eMilliput\u003cspan\u003e® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as it doesn't shrink, bubble crack or change shape over time. When it is set, it can then be sandpapered, painted and varnish. \u003c\/span\u003e\u003cspan\u003eIt can be used as a gap or crack filler, or sculpted into whatever shape is required. Colour can be achieved by blending different types of Milliput together, or by painting with quality acrylics. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eModelling using clay modelling tools whilst the putty is still clay-like is recommended, and adding a drop of water to the surface and rubbing it in will remove fingerprints and smooth the surface. If the surface has already set and needs further adjusting, this can be done with a gentle air pen (e.g. the ZOIC MR Microraptor or VR Velociraptor). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMilliput is used by blending equal amounts of each stick (two in a pack), by rolling and kneading until the colour is uniform and free from streaks. It can then be manipulated like modelling clay. Milliput goes rock hard in two to three hours at normal room temperature (faster with heat, and can be kept as putty for 72 hours in the freezer). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eLike epoxy glue, there are two sticks in a pack - one resin and one hardener. Kept separately, these two parts will last a long time unused. Whilst Milliput is permanent and highly adhesive, it is possible to remove. We recommend putting film of Paraloid B-72 on the surfaces that will adhere to the Milliput, which can then be loosened again with acetone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eYou can blend different Milliput colours together to aid with colour matching, but it is not recommended to mix with matrix as it will change the properties of the resin. \u003c\/span\u003ePowder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used. When performing fossil restoration, the texture achieved is vital and colour is better matched afterwards with acrylic paints. \u003c\/p\u003e\n\u003cp\u003eCan also be used for mould making and can be cast.\u003c\/p\u003e","brand":"Milliput","offers":[{"title":"Default Title","offer_id":39252399685695,"sku":"MILP4PACK","price":10.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Stonerestorationmilliputpack.jpg?v=1614598860"},{"product_id":"milliput-bumper-pack-5-colours","title":"Milliput Bumper Pack (5 colours)","description":"\u003cp data-mce-fragment=\"1\"\u003eIn the pack:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Yellow-Grey \u003c\/li\u003e\n\u003cli\u003e1 x Black \u003c\/li\u003e\n\u003cli\u003e1 x Superfine White\u003c\/li\u003e\n\u003cli\u003e1 x Silver Grey\u003c\/li\u003e\n\u003cli\u003e1 x Terracotta\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003eMilliput\u003cspan data-mce-fragment=\"1\"\u003e® is a two-part epoxy putty that adheres exceptionally well to rocks and fossils. It is used widely for restoration and repair of fossils, as it doesn't shrink, bubble crack or change shape over time. When it is set, it can then be sandpapered, painted and varnish. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eIt can be used as a gap or crack filler, or sculpted into whatever shape is required. Colour can be achieved by blending different types of Milliput together, or by painting with quality acrylics.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eModelling using clay modelling tools whilst the putty is still clay-like is recommended, and adding a drop of water to the surface and rubbing it in will remove fingerprints and smooth the surface. If the surface has already set and needs further adjusting, this can be done with a gentle air pen (e.g. the ZOIC MR Microraptor or VR Velociraptor).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMilliput is used by blending equal amounts of each stick (two in a pack), by rolling and kneading until the colour is uniform and free from streaks. It can then be manipulated like modelling clay. Milliput goes rock hard in two to three hours at normal room temperature (faster with heat, and can be kept as putty for 72 hours in the freezer).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eYou can blend different Milliput colours together to aid with colour matching, but it is not recommended to mix with matrix as it will change the properties of the resin. \u003c\/span\u003ePowder pigment can be mixed in, in small quantities, so that the mixture does not become too dry and crumbly. Strong powder pigment rather than powder paint is better as smaller amounts can be used. When performing fossil restoration, the texture achieved is vital and colour is better matched afterwards with acrylic paints. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLike epoxy glue, there are two sticks in a pack - one resin and one hardener. Kept separately, these two parts will last a long time unused. Whilst Milliput is permanent and highly adhesive, it is possible to remove. We recommend putting film of Paraloid B-72 on the surfaces that will adhere to the Milliput, which can then be loosened again with acetone.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCan also be used for mould making and can be cast.\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":39252424097855,"sku":"MILLIPUT5","price":16.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Milliput-Epoxy-Putty.jpg?v=1614599940"},{"product_id":"30-wt-vol-paraloid-b-72-premixed-in-acetone-dilute-as-required","title":"30% wt\/vol Paraloid B-72 Premixed in Acetone (dilute as required)","description":"\u003cp\u003eTake all the hassle out of mixing up your own Paraloid™ solutions at home. Simply dilute this 15% solution as required. No additives, no nasties, just straight up Paraloid in Acetone ready to use out of the bottle. Conservation grade.\u003c\/p\u003e\n\u003cp\u003eA 10% solution can be used as a thicker consolidant or a varnish. The solution can be further diluted as per user requirements.\u003c\/p\u003e\n\u003cp\u003eIn fossil preparation, we use very thin solutions of Paraloid B-72 to consolidate or impregnate rocks and fossils, essentially turning them to plastic. Repeat applications of 2-5% wt\/vol solutions in acetone are frequently used to consolidate, followed by a 5-10% wt\/vol solution to seal the surface. A 10% solution can also act as a removable varnish. 20-30% solutions can be used as a protective barrier. \u003c\/p\u003e\n\u003cp\u003eSuitable for fossils, minerals, rocks, metals, ceramics, wood and more. Not suitable for plastics and rubber.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/paraloid-b72-in-fossil-preparation\"\u003eRead our comprehensive guide to using Paraloid B-72 in fossil preparation here. \u003c\/a\u003e\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"UK Mainland Shipping ONLY \/ 500ml","offer_id":39252434976831,"sku":"ZPTPB7215-YE","price":32.31,"currency_code":"GBP","in_stock":true},{"title":"UK Mainland Shipping ONLY \/ 1000ml","offer_id":39252435009599,"sku":"","price":47.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/30percentparaloidsolutionacetoneconservation.jpg?v=1614602474"},{"product_id":"butvar-b-76","title":"Butvar® B-76","description":"\u003cp data-mce-fragment=\"1\" style=\"text-align: left;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eButvar\u003c\/span\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" id=\"lblProductName\"\u003e®\u003c\/span\u003e\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e B-76 is a thermoplastic, polyvinyl butyral resin. \u003c\/span\u003eButvar\u003cb data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" id=\"lblProductName\"\u003e®\u003c\/span\u003e\u003c\/b\u003e B-76 is supplied in coarse powder form with an unlimited shelf life, which dissolves (albeit slowly) in a solution of either acetone or ethanol (amongst others). It sets when the solvent evaporates. It is mostly used nowadays in fossil preparation as a \u003cstrong\u003econsolidant\u003c\/strong\u003e, \u003cstrong\u003ea semi-matt varnish\u003c\/strong\u003e, a translucent but \u003cstrong\u003estrong filler material\u003c\/strong\u003e and less commonly as an \u003cstrong\u003eadhesive\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: left;\"\u003eButvar B-76 as a filler material in fossil preparation: It can be combined with ground matrix to create a natural filler paste, which is rigid when set but easily dissolved or reworked. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: left;\"\u003eIt is often best used as a field consolidant or mid-mechanical prep consolidant as it is easier to remove than Paraloid B-72. Butvar B-76 redissolves in acetone or ethanol much more readily than Paraloid B-72 if used as only a temporary consolidant.  The matrix isn't consolidated quite as firmly and adhesion with the specimen isn't as strong as with Paraloid B-72. This has it's advantages when working mid prep - the matrix can be consolidated for mechanical removal with an air scribe, but isn't too firmly set. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: left;\"\u003eIf using as a varnish, Butvar B-76 has a more matt (much less shiny) appearance than Paraloid B-72 which is often desirable. In this sense, it is similar to Mowithal B30H.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: left;\"\u003eIt also has a higher glass transition temperature (62-72C) than Paraloid B-72, making it better suited to fieldwork in hotter climates or storage of specimens in warmer rooms (glass roof, conservatories, etc.). \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: left;\"\u003eSoluble in acetone, ethanol, xylene, toluene and more. For instructions of how to mix Butvar B-76 effectively \u003ca href=\"https:\/\/www.zoicpalaeotech.co.uk\/pages\/paraloid-b72-in-fossil-preparation\"\u003echeck out our article on mixing Paraloid B-72.\u003c\/a\u003e Whilst you might need to play around with the concentrations depending on your application, the principles of measuring and mixing are the same. Butvar B-76, however, may take longer to dissolve than you expect. The process can take several days.  \u003c\/p\u003e\n\u003cdiv data-id=\"1613207562680\" data-icon=\"gpicon-row\" class=\"gf_row\" id=\"r-1613207562680\" data-key=\"row\" data-label=\"Row\"\u003e\n\u003cdiv data-id=\"1613206516069\" id=\"c-1613206516069\" class=\"gf_col-lg-12 gf_column\"\u003e\n\u003cdiv data-extraclass=\"\" data-id=\"1613207562758\" data-icon=\"gpicon-row\" class=\"gf_row\" id=\"r-1613207562758\" data-key=\"row\" data-label=\"Row\"\u003e\n\u003cdiv data-id=\"1613206536626\" id=\"c-1613206536626\" class=\"gf_column gf_col-xs-12 gf_col-lg-1 gf_col-md-1 gf_col-sm-1\"\u003e\n\u003cdiv data-id=\"1613207562753\" data-ver=\"1.0\" data-icon=\"gpicon-icon\" class=\"element-wrap\" id=\"e-1613207562753\" data-key=\"icon\" data-label=\"Icon\"\u003e\n\u003cdiv data-exc=\"\" class=\"elm gf-elm-center gf-elm-center-sm gf-elm-center-lg gf-elm-center-md gf-elm-center-xs\"\u003e\n\u003cdiv class=\"gf_icon-wrap\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"50g","offer_id":39272797339711,"sku":"","price":8.95,"currency_code":"GBP","in_stock":true},{"title":"100g","offer_id":39272797372479,"sku":"","price":12.95,"currency_code":"GBP","in_stock":true},{"title":"250g","offer_id":39272797405247,"sku":"","price":19.95,"currency_code":"GBP","in_stock":true},{"title":"500g","offer_id":39272797438015,"sku":"","price":33.95,"currency_code":"GBP","in_stock":true},{"title":"1000g","offer_id":39272797470783,"sku":"","price":49.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/ButvarB76.jpg?v=1615995870"},{"product_id":"akemi-platinum-p-knife-grade","title":"AKEMI PLATINUM Knife-Grade Stone Adhesive 900ml","description":"\u003cdiv class=\"description\" data-mce-fragment=\"1\"\u003e\n\u003cp style=\"text-align: left;\" class=\"gray\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003eKnife-grade, transparent-opaque adhesive (very light basic colour), based on epoxyacrylate, high bonding power, very fast surface drying and processability. Does not change its consistency by stirring. Resistant to chemical preparation in dilute acids and alkalis.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" class=\"gray\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003eExtremely strong adhesive, which can be used for large blocks and stones, and mixed with powdered stone or epoxy pigments for colouration or to create artificial rock\/calcite. Resistant to water, petrol, mineral oils and high temperatures up to 110\u003cspan data-mce-fragment=\"1\"\u003e°C. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" class=\"gray\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOffers a shorter working\/processing time than AKEMI Marble Filler 1000, as well as a considerably faster hardening time. Much higher chemical resistance if using solvents\/acids\/alkalis in your preparation, and higher resistance to water. Epoxy acrylate resins are more durable and stronger than polyester resins like AKEMI Marble Filler 1000, but are more expensive.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" class=\"gray\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eProcessing\/working time 5-15 minutes. Hardening time 15-40 minutes. Processing temperature 0-30°C.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\" class=\"gray\" data-mce-fragment=\"1\" data-mce-style=\"text-align: left;\"\u003eExcellently suitable for bonding and filling of natural stone. Suitable for vertical applications as well as for modelling of corners and edges. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"image\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"slick-initialized slick-slider\" id=\"product_image_slider\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"slick-list draggable\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"slick-track\" data-mce-fragment=\"1\"\u003e\n\u003cul\u003e\n\u003cli\u003eExterior \/ Interior: Interior\u003c\/li\u003e\n\u003cli\u003eBonding application: Bonding, Filling\u003c\/li\u003e\n\u003cli\u003eWorking time: Short\u003c\/li\u003e\n\u003cli\u003eAdhesive technology: Epoxy-acrylate (also known as vinyl ester; not to be confused with pure epoxy)\u003c\/li\u003e\n\u003cli\u003eUV stability: Well\u003c\/li\u003e\n\u003cli\u003eBonding: Rigid\u003c\/li\u003e\n\u003cli\u003eHardening time: Fast\u003c\/li\u003e\n\u003cli\u003ePolishing ability: Excellent\u003c\/li\u003e\n\u003cli\u003eConsistency: Gel-like\u003c\/li\u003e\n\u003cli\u003eColour: Transparent, Can be coloured\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e900ml + 30g hardener. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDue to the nature of this product, we are restricted by our couriers to England and Wales mainland shipping only (excludes IOW). We can ship to IOW and Scotland, but surcharges will apply. Please contact us for more information and pricing. \u003cspan style=\"text-decoration: underline;\"\u003eUnfortunately, international shipping is not possible at this time.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #4f4f56;\"\u003e\u003ca href=\"https:\/\/data.akemi.de\/fileadmin\/user_upload\/products\/productdocuments\/TMB\/Platinum_TMB_GB.pdf\" style=\"color: #4f4f56;\" target=\"_blank\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #4f4f56;\"\u003e\u003ca href=\"https:\/\/data.akemi.de\/fileadmin\/user_upload\/products\/productdocuments\/SDB\/Platinum_L_Spezial_SDB_GB.pdf\" style=\"color: #4f4f56;\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AKEMI","offers":[{"title":"England \u0026 Wales Mainland ONLY (excl. IOW)","offer_id":39484344107071,"sku":"","price":48.22,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/10725_Platinum-knifegrade-P.jpg?v=1634300175"},{"product_id":"akemi-colouring-pigment-paste-polyester-30ml","title":"AKEMI Colouring Pigment Paste (Polyester) 30ml","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eAkemi® Colouring Paste (Polyester) - 30ml is a paste like colour concentrate, used for colouring Marble Filler 1000 and Platinum (epoxy acrylate adhesive) available in our online shop. It is designed to assist matching the colour of the adhesive to that of the stone or fossil.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eDo not use prior to chemical (acid\/alkali) preparation. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe stock the most common colours used in fossil preparation, but if there is another colour you need, let us know and we will bring some in for you. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003ca href=\"https:\/\/data.akemi.de\/fileadmin\/user_upload\/products\/productdocuments\/SDB\/Farbpasten_Polyester_SDB_GB.pdf\" target=\"_blank\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"AKEMI","offers":[{"title":"02 Red\/Brown \/ UK Mainland ONLY","offer_id":39484375990335,"sku":"","price":8.5,"currency_code":"GBP","in_stock":false},{"title":"03 White \/ UK Mainland ONLY","offer_id":39484376023103,"sku":"","price":8.5,"currency_code":"GBP","in_stock":false},{"title":"04 Black \/ UK Mainland ONLY","offer_id":39484376055871,"sku":"","price":8.5,"currency_code":"GBP","in_stock":false},{"title":"05 Ochre \/ UK Mainland ONLY","offer_id":39484376088639,"sku":"","price":8.5,"currency_code":"GBP","in_stock":false},{"title":"11 Brown \/ UK Mainland ONLY","offer_id":39484376121407,"sku":"","price":2.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/Farbpasten_Polyesterbasis_72dpi.jpg?v=1634307017"},{"product_id":"akemi-hardener-paste","title":"AKEMI Hardener 20g","description":"\u003cp\u003e20g for use with AKEMI Marble Filler 1000 Waterclear \u0026amp; AKEMI Platinum.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/data.akemi.de\/fileadmin\/user_upload\/products\/productdocuments\/SDB\/Haerterpaste_weiss_SDB_GB.pdf\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/p\u003e","brand":"AKEMI","offers":[{"title":"Default Title","offer_id":39484379693119,"sku":"","price":8.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/30406_30407_Haerterpaste_weiss.jpg?v=1634307592"},{"product_id":"paraloid™-b-67","title":"Paraloid™ B-67","description":"\u003cp\u003eParaloid B-67 is an i\u003cspan data-mce-fragment=\"1\"\u003esobutyl methacrylate polymer that dries harder than \u003ca href=\"https:\/\/www.zoicpalaeotech.co.uk\/products\/paraloid-b-72?_pos=1\u0026amp;_sid=3271e614d\u0026amp;_ss=r\" data-mce-href=\"https:\/\/www.zoicpalaeotech.co.uk\/products\/paraloid-b-72?_pos=1\u0026amp;_sid=3271e614d\u0026amp;_ss=r\" data-mce-fragment=\"1\"\u003eParaloid B-72.\u003c\/a\u003e  This resin is soluble in white spirit, acetone, alcohols, toluene, xylene and glycol. It can be used as a protective barrier for fossils, or as a coating in archival marking. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIndustrially, it is used as an impregnative barrier for rust-prone metals to protect them, e.g. in automotives.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eParaloid B-67 is hydrophobic, providing excellent water resistance (a suitable sealant following Pyrite Decay treatment in Pyrite Stop). With this hydrophobic (water-repelling) property it is a better candidate for this than \u003ca href=\"https:\/\/www.zoicpalaeotech.co.uk\/products\/paraloid-b-72?_pos=1\u0026amp;_sid=3271e614d\u0026amp;_ss=r\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.zoicpalaeotech.co.uk\/products\/paraloid-b-72?_pos=1\u0026amp;_sid=3271e614d\u0026amp;_ss=r\"\u003eParaloid B-72\u003c\/a\u003e. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003e It can provide an excellent barrier against both atmospheric moisture and gas (oxygen); with much lower permeability than Paraloid B-72. Storage in low humidity environments remains essential, but Paraloid B-67 can provide an extra barrier layer between atmosphere and fossil. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eParaloid B-67 is also removable as it is redissolvable in solvent, and so it can be used and then removed prior to another round of treatment in \u003ca href=\"https:\/\/www.zoicpalaeotech.co.uk\/products\/pyrite-stop?_pos=1\u0026amp;_sid=4e9f67b9b\u0026amp;_ss=r\"\u003ePyrite Stop\u003c\/a\u003e (ethanolamine thioglycollate). \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eWe recommend dissolution in acetone for this application for the clarity of solution, speed of evaporation and impregnation capabilities. For archival marking, dissolution in white spirit is the most common to prevent running of ink. Paraloid B-67 does take a long time to dissolve in solvent, so be patient. You can use the same calculations and mixing instructions as for Paraloid B-72 described \u003cspan style=\"text-decoration: underline;\"\u003e\u003ca href=\"https:\/\/www.zoicpalaeotech.co.uk\/pages\/paraloid-b72-in-fossil-preparation\"\u003ehere in this article.\u003c\/a\u003e\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eProlonged exposure to UV light will cause yellowing, but in thin coatings this is unlikely to be noticeable. It can be removed with solvent and reapplied. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eNot to be confused with the more commonly used \u003ca href=\"https:\/\/www.zoicpalaeotech.co.uk\/products\/paraloid-b-72?_pos=1\u0026amp;_sid=3271e614d\u0026amp;_ss=r\"\u003eParaloid B-72\u003c\/a\u003e, which is chemically very different, and used as an adhesive and consolidant. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eIn archaeology, it is used to stabilise bone, clay, stone and other fragile artifacts. It is used outdoors for artefacts and monuments that require a hydrophobic (water repelling) coating.\u003c\/span\u003e\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"100g","offer_id":39484385394751,"sku":"","price":5.95,"currency_code":"GBP","in_stock":true},{"title":"250g","offer_id":39484385427519,"sku":"","price":9.95,"currency_code":"GBP","in_stock":true},{"title":"500g","offer_id":39484385460287,"sku":"","price":18.95,"currency_code":"GBP","in_stock":true},{"title":"1000g","offer_id":39484385493055,"sku":"","price":29.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/pARALOIDB67BAG.jpg?v=1634982327"},{"product_id":"hmg-paraloid-b72-adhesive","title":"HMG Paraloid B72 Adhesive 14ml","description":"\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eHMG Paraloid B-72 is a heat and waterproof adhesive in tubes designed for repairs to pottery, wood, metal, ivory, glass, or other porous substances, except rubber. HMG B72 is virtually colourless and boasts an ability to resist yellowing for a considerable period of time. Its glass transition temperature is approximately 40 C. Excess adhesive can be removed with acetone. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eGrab isn't instant and so fragments can be worked and readjusted. 14ml tube. Touch dry in 10 minutes at surface. 12 hours full dry at room temperature. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/portal.hmgpaint.com\/msds\/sd683(GB).pdf\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSafety Data Sheet PDF\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"HMG","offers":[{"title":"Default Title","offer_id":39520799785023,"sku":"","price":6.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/258616146_316276366703341_2673961171018458647_n.png?v=1637234766"},{"product_id":"quick-drying-clear-2-part-epoxy-adhesive","title":"Quick Drying, Clear 2-Part Epoxy Adhesive","description":"\u003cp\u003eA fast-setting, 5 minute, \u003cspan data-mce-fragment=\"1\"\u003ehigh strength clear epoxy. Supplied in a dual syringe for accurate dispensing and easy mixing. When cured it provides a tough, insoluble bond with good adhesion to a variety of substrates and stone types.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eEpoxies are good for bonding heavier, larger rocks and blocks. Non-reversible and so not conservation grade. This is a clear epoxy, which yellows only slightly once set. All pure epoxy resins are prone to yellowing, and ours keeps its clarity extremely well. We would recommend, as with all epoxy resins (not to be confused with the chemically-different AKEMI epoxy acrylates) using on joins where the epoxy itself won't be seen where the bond is joined and together.\u003c\/span\u003e\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Yes","offer_id":39522915582015,"sku":"","price":5.95,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/257768866_613146963163403_2845724068896862144_n.png?v=1637384600"},{"product_id":"akemi-platinum-liquid-stone-adhesive-900ml","title":"AKEMI PLATINUM Liquid Stone Adhesive 900ml","description":"\u003cdiv data-mce-fragment=\"1\" class=\"description\"\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: left;\" class=\"gray\" data-mce-style=\"text-align: left;\"\u003eTransparent-clear adhesive (very light basic colour), based on epoxyacrylate, high bonding power, very fast surface drying and processability. Does not change its consistency by stirring. Resistant to chemical preparation in dilute acids and alkalis.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: left;\" class=\"gray\" data-mce-style=\"text-align: left;\"\u003eExtremely strong adhesive, which can be used for large blocks and stones, and mixed with powdered stone or epoxy pigments for colouration or to create artificial rock\/calcite. Resistant to water, petrol, mineral oils and high temperatures up to 110\u003cspan data-mce-fragment=\"1\"\u003e°C. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: left;\" class=\"gray\" data-mce-style=\"text-align: left;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOffers a shorter working\/processing time than AKEMI Marble Filler 1000, as well as a considerably faster hardening time. Much higher chemical resistance if using solvents\/acids\/alkalis in your preparation, and higher resistance to water. Epoxy acrylate resins are more durable and stronger than polyester resins like AKEMI Marble Filler 1000, but are more expensive.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: left;\" class=\"gray\" data-mce-style=\"text-align: left;\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eProcessing\/working time 5-15 minutes. Hardening time 15-40 minutes. Processing temperature 0-30°C.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\" style=\"text-align: left;\" class=\"gray\" data-mce-style=\"text-align: left;\"\u003eExcellently suitable for bonding and filling of natural stone.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"image\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"slick-initialized slick-slider\" id=\"product_image_slider\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"slick-list draggable\"\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"slick-track\"\u003e\n\u003cul\u003e\n\u003cli\u003eExterior \/ Interior: Interior\u003c\/li\u003e\n\u003cli\u003eBonding application: Bonding, Filling\u003c\/li\u003e\n\u003cli\u003eWorking time: Short\u003c\/li\u003e\n\u003cli\u003eAdhesive technology: Epoxy-acrylate (also known as vinyl ester; not to be confused with pure epoxy)\u003c\/li\u003e\n\u003cli\u003eUV stability: Well\u003c\/li\u003e\n\u003cli\u003eBonding: Rigid\u003c\/li\u003e\n\u003cli\u003eHardening time: Fast\u003c\/li\u003e\n\u003cli\u003ePolishing ability: Excellent\u003c\/li\u003e\n\u003cli\u003eConsistency: \u003cspan data-mce-fragment=\"1\"\u003eLiquid\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eColour: Transparent, Can be coloured\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e900ml + 30g hardener. \u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDue to the nature of this product, we are restricted by our couriers to England and Wales mainland shipping only (excludes IOW). We can ship to IOW and Scotland, but surcharges will apply. Please contact us for more information and pricing. \u003cspan style=\"text-decoration: underline;\" data-mce-style=\"text-decoration: underline;\"\u003eUnfortunately, international shipping is not possible at this time.\u003c\/span\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #4f4f56;\" data-mce-style=\"color: #4f4f56;\"\u003e\u003ca href=\"https:\/\/data.akemi.de\/fileadmin\/user_upload\/products\/productdocuments\/TMB\/Platinum_TMB_GB.pdf\" style=\"color: #4f4f56;\" target=\"_blank\" data-mce-style=\"color: #4f4f56;\"\u003eTechnical Data Sheet\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #4f4f56;\" data-mce-style=\"color: #4f4f56;\"\u003e\u003ca href=\"https:\/\/data.akemi.de\/fileadmin\/user_upload\/products\/productdocuments\/SDB\/Platinum_L_Spezial_SDB_GB.pdf\" style=\"color: #4f4f56;\" target=\"_blank\" data-mce-style=\"color: #4f4f56;\"\u003eSafety Data Sheet\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"AKEMI","offers":[{"title":"England \u0026 Wales Mainland ONLY (excl. IOW)","offer_id":39587124117567,"sku":null,"price":48.22,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/10726_Platinum-Fluessig-P.jpg?v=1643894377"},{"product_id":"3-x-50g-low-medium-and-high-viscosity-superglue","title":"3 x 50g Low, Medium and High Viscosity Superglue","description":"\u003cp\u003e3-Pack of our three grades of liquid cyanoacrylate. 3x 50g bottles of low, medium and high viscosity. Perfectly suited to a variety of tasks in fossil, mineral and rock conservation and preparation.\u003c\/p\u003e\n\u003cp\u003eAll surfaces to be bonded must be clean, dry, oil and grease free. Apply to one surface only and bring together immediately. Once aligned and set, the components cannot be reset without debonder. Activator can be purchased separately to instantly set glue. Full cure after 24 hours.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.zoicpalaeotech.co.uk\/pages\/superglues-in-fossil-preparation\"\u003eLearn more about using superglues in fossil preparation here.\u003c\/a\u003e\u003c\/p\u003e","brand":"ZOIC PalaeoTech","offers":[{"title":"Default Title","offer_id":39587126870079,"sku":"","price":24.16,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/273256611_622940595676645_6556719885076674011_n_1.png?v=1643895067"},{"product_id":"acetone-50ml","title":"Acetone (100ml)","description":"\u003cp\u003e100ml of Acetone. Very useful as a small quantity for archival marking, cleaning brushes, or other small jobs. Can also be used for periodically cleaning parts of your air scribe. \u003c\/p\u003e\n\u003cp\u003e18+ Only\u003c\/p\u003e\n\u003cp\u003eUK Mainland Shipping ONLY\u003c\/p\u003e","brand":"ZOIC PalaeoTech Limited","offers":[{"title":"UK Mainland Shipping ONLY","offer_id":40001878261823,"sku":"","price":2.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/PhotoRoom-20230307_155138_2_1.png?v=1678204395"},{"product_id":"economy-solvent-resistant-brush-1-2","title":"Economy Solvent Resistant Brush (1\/2\")","description":"\u003cp\u003eArchival grade solvent resistant brush. Natural wooden handle with no varnish or paint applied, making this brush suitable for conservation with solvents or solvent-based substances. \u003c\/p\u003e\n\u003cp\u003eThe tough bristles withstand harsh chemicals very well.\u003c\/p\u003e\n\u003cp\u003eAn economy brush, suitable for tasks where the brush will be rendered unusable potentially after just one use, in contact with resin, epoxies or wherever a fine surface or application is not paramount. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e0.5 Inch\/12mm\u003c\/li\u003e\n\u003cli\u003eNatural wood handle\u003c\/li\u003e\n\u003cli\u003eAluminium ferrule\u003c\/li\u003e\n\u003cli\u003ePure white bristle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e168mm length.\u003c\/p\u003e","brand":"ZOIC PalaeoTech Limited","offers":[{"title":"Default Title","offer_id":40022950051903,"sku":"PPB00193","price":0.89,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0252\/4695\/7631\/products\/PhotoRoom-20230307_125725.png?v=1678194548"}],"url":"https:\/\/www.zoicpaleotech.com\/collections\/consolidants-adhesives\/kits-bundles.oembed","provider":"ZOIC PalaeoTech Limited","version":"1.0","type":"link"}